PVC mixing machine is composed of a U-shaped container, a spiral belt stirring blade and a transmission part; the U-shaped long cylinder structure of the horizontal mixer ensures the small resistance movement of the mixed materials (powder, semi-fluid) in the cylinder. The positive and negative rotating ribbons of the horizontal mixer are installed on the same horizontal shaft to form a low-power and high-efficiency mixing environment. Collected to the center, the inner spiral conveys the material from the center to both sides, which can make the material form more eddy currents in the flow, speed up the mixing speed of the horizontal mixer, and improve the mixing uniformity; the belt pulley is used to drive the cycloid reducer to drive, compared with the large torque of the gear reducer, the elastic connection of the belt drive has the advantage of protecting the transmission parts when overloaded.
The discharge method of the horizontal mixer: the powder material adopts the pneumatic large door structure, which has the advantages of fast discharge and no residue; the high-fineness material or semi-fluid material adopts the manual butterfly valve or the pneumatic butterfly valve. The manual butterfly valve is economical and suitable, and the pneumatic Butterfly valve has good sealing performance for semi-fluid, but the cost is higher than manual butterfly valve. Jackets can be configured where heating or cooling is required. The heating method of the horizontal mixer has two options: electric heating and heat-conducting oil heating: electric heating is convenient, but the heating speed is slow and energy consumption is high; But the heating rate is fast and the energy consumption is low. The cooling process can directly inject cooling water into the jacket, the jacket has a large heat exchange area and a fast cooling speed. The motor and the stirring main shaft are directly connected by a cycloidal pinwheel reducer, which has a simple structure, high operation reliability and convenient maintenance.
PVC mixing machine is used in the mixing of pesticides, veterinary drugs, food, chemicals, biology, aquaculture, ceramics, refractory materials, plastics, compound fertilizers, etc. It is especially suitable for mixing viscous materials.
Mixing Machine Screen and Sealing Improvement
Mixer is a kind of equipment that grinds wet powder blocks into particles in a rotating way, and ca…
High And Low Speed Mixers Require Reasonable Loading
The reasonable use of the high and low speed mixer requires the user to reasonably load the materia…
High Speed Mixer Good Development Prospects
High speed mixer is suitable for mixing powder or pellet like material in chemical, food, medicine,…