X

What Factors Determine The Working Efficiency of The Screw Belt Mixer

The working efficiency of the screw belt mixing machine mainly depends on its type and the manufacturing accuracy of the equipment itself. In general, the mixer takes less time to mix evenly, while the screw belt mixer takes longer to mix evenly. The physical properties of the ingredients also affect the mixing time.

The outer wall cavity of the mixing machine chamber of the screw-belt mixer is heated and heated by resistance. Ingredients measured according to the recipe are then added to the mixing chamber. When the mixed slurry in the mixing chamber rotates at high speed, the raw material near the mixed slurry rotates with the mixed slurry due to friction on the blade surface and the push out of the blade end face. Become the raw material for the diaphragm wall impact.

When the wall impact material rises to the corresponding height along the inner wall of the mixing chamber, due to the gravity of the raw material, it falls back to the center of the mixing chamber and is then thrown out by the rotating blades to repeat the original motion. Because the rotational flow mode of the material is more regular, the direction of movement of the material is disrupted.

Then due to the mixed motion of several materials, the friction and pushing between the materials, so that the material between a certain degree of friction heat; In addition, sometimes the raw material mixing also needs to be mixed outdoor heating, so because of the comprehensive impact of these conditions, the different mixed materials in the mixing room are mixed evenly.

The use of screw belt mixer for material mixing processing can provide a lot of benefits for manufacturers, but in order to ensure the quality of processing and production, play to the advantages of the application of equipment, it is necessary to understand the installation and use of some equipment precautions. For example, in the material processing operation through the screw belt mixer, need to pay attention to the amount of material control, during the release period should be a small amount of investment, and then slowly increase the amount of material, so that in the process of mixing can make the material mixed evenly.

Spread the love

Relevant Articles

High And Low Speed Mixers Require Reasonable Loading

High And Low Speed Mixers Require Reasonable Loading

The reasonable use of the high and low speed mixer requires the user to reasonably load the materia…

High Speed Mixer Good Development Prospects

High Speed Mixer Good Development Prospects

High speed mixer is suitable for mixing powder or pellet like material in chemical, food, medicine,…

Basic Principle of Heating High Speed Mixer

Basic Principle of Heating High Speed Mixer

The material in the hopper of the heating high speed mixer is evenly spread on the stainless steel …

Popular related products